Meshmixer 2.6 on the loose. Tubes!

Meshmixer 2.6 was released today by Autodesk with some nice additions for your 3D printing workflows.

One of the new features I've found fun to play with is the Add Tube feature which lets you route tubes through your 3D models. Its pretty interactive as you drag the handles around to define the start and end of the tube.  By default, the tubes are routed automatically through the inside of your model and cut out. Some parameters and alternate behavior is possible such as routing with straight lines, splines, inside or out of the model, adjusting the start and end size, and creating a separate tube object. It will even route around previously routed tubes in case you need multiple tubes. Some amazing work by Valkyrie Savage, an intern with Autodesk Research, went into bringing this feature to Meshmixer for this release.

Here is my first model using this feature: a (hopefully not offensive) DIY bunny sprinkler that shoots water out of its eyes!

Of course there are many other (useful) possibilities using this feature in your projects including routing circuits or electronics through a 3d model, or possibly 3D printing conductive material. See this video for more of what Ryan and his team have been up to.

  

Amongst other things, here is a list of what is included in Meshmixer 2.6, now on the loose!

  • Simplified 3D Print UI
  • Support for Dremel 3D Printer (printer/support preset, send prints to Dremel Idea Builder software)
  • (experimental!!) DLP/SLA support preset
  • New Orientation tool for optimizing print orientation to miminize support volume/area, and/or maximize print strength
  • New Add Tube tool for creating tubes through/between shapes
  • New Preserve Boundaries option in Smooth Boundary
  • New Allow Top Connections option in Support Generator
  • Brought back Strut Density option in Support Generator
  • Fix longstanding Axis scaling bugs in transforms
  • Face Transform & Soft Transform tools now infer local frame from selection, and can optionally have separate frame for each ROI

 

Download Meshmixer here....onwards fellow Makers!



 

 

123D Make (Love)

We've seen some really great usage of 123D Make this week! While most folks are constrained to a relatively small scale, with desktop CNC or lasers at a local TechShop, we found some artists and designers who are pushing their creations to human scale (and beyond).

                              

First, we got an email from down under: Georgia Morgan in Broome, Australia, has made a full-scale figure from 3mm steel using 123D Make.  It's a pretty elegant use of the radial slicing feature, and we're so honored to have been a part of it!

 

Over in Europe, Lana Awad teamed up with Fab Textiles and FabLab Barcelona to create "Rig", a life-size mannequin that was showcased at Fab10 in July.  


From Fab Textiles: "The design for RIG is an exploration into the creative potential of mannequins as tools for exhibiting and work with. RIG is a manifestation on how tools should be rethought, redesigned, and reimagined..."  We couldn't agree more, and we love seeing such an ambitious use of the 123D tools.


Perhaps the most impressive, in terms of scale... while installing our Autodesk Gallery Pop-Up in Paris, the team stopped by the Paris Auto Show and saw a giant elephant cut from cardboard!  

I know there are others out there joining their massive radial slices together!  What did we miss?

 

Down the Creature Feedr Hole.

Have you seen the Creature Feedr Tumblr yet?   It's pretty great.

So far, 4 of our most prolific users have created video of their process with 123D Creature to share. Each artist has a different process, and it's kind of fascinating to see how they approach each of their creations.  Also, all the Creature Feedrs get a 3D print from our friends at Sculpteo!

 

                             

Adam Beamish starts deceptively simply, choosing to manipulate the wireframe into a generic bust before baking.  From there, it's all tweaking and surface manipulation to create his amazing characters.

 

Cecelia Gaxiola and Michael Whiteside use the wire skeleton much more to outline their creations and use color to enhance later.

 

Check out the newest from Joe Batty - this may be the cutest Creature so far.

We also post great models we see in the 123D gallery pretty regularly.  My hands-down favorite so far is the Simpsons series by cRe@YvEs.  Though, Marge is a little risque (not necessarily a bad thing).

Want to submit a Creature? Just click submit at the top of the Feedr page or go here!

Maker Faire New York – it’s a wrap!

In continuation with our coverage of Maker Faire New York, check out the photos below! Maker Faire is always a good time, and this year's festival in New York was no exception. Tinkercad, Instructables, 123D Circuits, and more attracted new makers, long time designers, families, and guests from all over the place to the Autodesk booth. It was wonderful to meet such diverse groups of people all delighting in the joys of 3D printing and making things.

 

Our troop of Peter the Penguins were especially popular!

 

Community Manager Andy Taylor showed some awesome live demos of Tinkercad, going with the theme of DC Comics - below you can see Peter the Penguin being transformed into The Flash!

 

Thanks to everyone for another great year! It was wonderful getting to meet so many of you, from educators to long time Autodesk users, and we can't wait to see you again next year.

123D Catch now on Android

123D Catch for Android is here!

Ever since we launched 123D Catch in late 2011, I've heard overwhelming requests from the Android community for a 123D Catch app compatible for their device. 

Today, I am happy to announce 123D CATCH FOR ANDROID IS HERE!!

See 123D Catch for Android on Google Play.

Its the first 123D app on Android by popular demand and compatible with most phones and tablets. So check it out!

 

Create captures on the go using your Android device, and edit them for 3D printing on your computer with Meshmixer.  All of your captures are saved in one place on your account at 123dapp.com.

 

Join The Open Source Dress – Using Tinkercad

For anyone who follows Anouk Wipprecht or is just hearing about her infamous, interactive 3D printed dresses - This is a chance to add YOUR design sensibility to one of her couture-creations...  Anouk x Polaire will be assembling 3D printed "Particles" made by people all over the world - into a complete "Open Source Dress".  There is still time to send your particle.

On the left: some of the smaller prototype dress.  On the right: a particle sent in by a contributor.  


Anouk added LED rings to some of her own particles, using them as examples.

Here's more... check out what people are making on Tinkercad by filtering for #ParticleDress:

To participate is quite simple if you or a friend have a 3D printer.  The easiest way is to simply 3D print this existing part in Tinkercad or if you're the creative type : change that 3D model in Tinkercad so it has your own personal style - then send the print to:

THE OPEN SOURCE ELEMENT DRESS 
Anouk Wipprecht x Polaire 
Schottenfeldgasse 72/8c 
1070 Wien, Austria

*** For all the details --- Check out Anouk's Instructable ***


We took a little time out of our day and designed / 3D printed a couple particles.  Have a look:

Below left is our version of their base model, it will easily print on a Makerbot or similar 3D printer (click to Tinker-it). Below middle is the "spikey" particle you see above, and below right is the "balloon" particle" you see above in white.


You can start with the base model (might require support material) or our blue/orange version of the base model (you can change the colors) that will require no support material.

If you don't have a 3D printer you're not out of luck.  There are several professional companies eager to perfectly-print your models and we've got them lined up on our 3D-Print page.  

Hope to see your particles on the Open Source Dress!
-123D

Get comfy with Meshmixer!

Patterned Chairs

Patterned Chairs

Just when you thought you had mastered all of the awesome features and tricks in Meshmixer, here we have a new version packed with new stuff to learn. Don't worry...Meshmixer 2.5, released today, is packed with new 3D printing features you have requested so the learning curve should be easy.

Take for example the new Hollow tool. A common workflow for making your 3D prints efficient and practical to use, creating a hollowed out object is now easier than before with this tool. Also, there are options for leaving cylindrical holes in the resulting hollowed out object making it easy to remove any internal support material and creating access to the inside of your print (see below).

Hollow Tool  Section of Hollow Result

 The new Bridge tool is another welcome addition for Meshmixer users, especially if you are working with captures from 123D Catch or scan data. Sometimes the holes are too large to fix easily or as desired. With the new Bridge tool, you can now join two selections on the hole's boundary with a patch. 

Bridge Tool

Bridge Tool

My favorite new feature is making linear and spherical gradients when using the Make Pattern tool. See the pattern gradient above on the right hand side chair as the features transition from large to small.

The full list of features is below, so take a look and download the new version at 123dapp.com/meshmixer!

  • Menu reorganization/New Preferences dialog
  • 3D printing Services update: support multicolor workflow
  • 3D printing Services update: improvement in Shapeways workflow
  • Custom symmetry plane adjustment option
  • Update to feedback
  • 3D Printing Help Document
  • New Hollow tool
  • New Bridge tool
  • New Tube Handle tool
  • New Thickness analysis/visualization tool
  • Extensive optimization of generated support structures
  • Make Pattern Linear and Spherical gradients, improved sizing UI
  • New Select Visible command (under Selection / Modify)
  • Project Face Groups and Minimum Thickness options in Make Solid
  • VRML (.wrl) export (with vertex colors)
  • Misc. improvements to Smooth Boundary, Remesh, Drop Solid
  • Various tools now remember settings
 
For those of you new to Meshmixer, check out our YouTube playlist for Meshmixer 101. I'll be adding more this week covering some of the basics of Meshmixer to help you create amazing things to 3D print.
Have fun!!
Patterned Primitives

Patterned Primitives

Introducing #SFEscapees, an Entirely 3D-printed Public Art Project

An enigma has occupied the San Francisco waterfront for a few months now — the iconic sea lions that typically invade the docks of Pier 39 have disappeared.

But what does that have to do with my last post?

123D-ers, enter my latest project: a love letter to the city of San Francisco and the unique marriage of creativity and technology that happens here. Keeping this sentiment in mind, I 3D-printed an army of sea lions and hid them (in plain sight) throughout the city.

Should you find one of the three-inch creatures, you will notice there is a hash tag sprawled across their glossy bellies: #SFescapees. Where have the sea lions escaped to, you may ask.
 

My theory is that they’ve escaped into the digital realm, only to be materialized in plastic and placed throughout the city. So let the search commence! Once you find a sea lion (distinguishable by its unicorn horn and hash tag) upload the image and geotag it. If you’re feeling particularly adventurous, pick it up and move it to a similarly visible location to keep it going. And bonus points for posting seal-fies. 

Autodesk’s 3DRV Rolls Across America

100+ scheduled stops. 8 months. A million stories. Welcome to the Autodesk 3DRV tour.
Are you interested in seeing (or being) 3D scanned?  Autodesk's very own 3DRV is cruising the country finding interesting stories to share and you might just be on their schedule.   


If you're stationed off the trail you can still keep up with TJ's daily blogs ranging from 3D scanning vintage motorcycles in Sturgis, SD to a feature on the Detroit Public Library Makerspace using our favorite apps: Tinkercad and 123D Catch.

Open the official 3DRV page.

 

123D Catch – improved quality and 3D printing workflows

 

Creating 3D models from your photographs just got easier today. 123D Catch V3 for Windows was just released with a notable improvement on project success and mesh quality, including a streamlined workflow for healing and 3D printing your captures in Meshmixer. Below I'll go into detail for how to use all the new features.


Most notably, there is vast improvement on automatic stitching of photographs you submit. In the previous version of 123D Catch the same set of photographs below, of the Hindu Deity Vishnu at the Asian Art Museum in San Francisco, required manual stitching those photos that weren't automatically stitched together. This new version has no problem automatically stitching all of the photos I've submitted. Gone are the days of manual stitching! Hurray!

Capture of Hindu Deity Vishnu at Asian Arts Museum in SF

Capture of Hindu Deity Vishnu at Asian Arts Museum in SF.

All of your captures are all stored in your account at 123dapp.com, so you can create captures on the go with the iOS app, then open them for further refinement on the desktop app. Below, I regenerate a denser mesh focused only on the sculpture by lasso selecting only the sculpture, then clicking Generate Mesh in the toolbar. This will only regenerate the selected area at a quality you decide (choosing Max will have more details at the cost of longer processing time and a larger file).


Finally, clicking File...3D Print...will load the capture into Meshmixer where you can heal and prepare your capture for 3D printing in a variety of materials with a 3D printing service or right on your own desktop 3D printer at home!

3D printing capture in Meshmixer

Hindu Deity Vishnu in Meshmixer, healed and with support structures for 3D printing

We are seeing some amazing and very unexpected captures coming in from our friends in the 123D community. The new 123D Catch desktop app will help even more whether you use the iOS app or shoot photos with your own camera. Need some tips or help on shooting just the right photographs for 123D Catch? Try here for some pointers.


I leave you with some of my recent favorite captures folks have shared in the gallery, for inspiration to create your own. Have fun!!

World Cup Trophy

World Cup Trophy

Hayderik on the Grass
Hayderik on the Grass

 

Falla Lo Rat Penat 2014

Falla Lo Rat Penat 2014